Volume 1 Issue 1 Article 5

Statical Analysis of Infilled Frames

Writer(s): Adnan Karaduman 1,

It is realized that infill dividers extensively change the conduct of casings under flat loads. Be that as it may, about this subject, there were insufficient information and experience aggregations contrasted and some different subjects in basic investigation. So as to add to the conduct of infilled outlines, a progression of investigations did under statical loads which were applied in the inclining bearing to the infilled tests having different conjunctions and thicknesses and surrounded with steel profiles. During the trial explore, the lessening in the level unbending nature brought about by the division and sliding between the casing and the infill ought to be thought about. It was known from the past investigates that after the edge isolated and slid, the infill divider works like a pressure bar; the examination results acquired from this examination likewise affirmed this reality. The properties of the "identical pressure bar" that speaks to the infill divider were concentrated to be assigned because of the exploratory information and contrasted and the qualities proposed in the writing. Trial investigates establish the premise of the examination.



Keyword(s): Statical, Analysis, Infilled, Frames,

  • [1] Polyakov, S.V., “On the Interaction Between Masonary Filler Walls and Enclosing Frame When Loaded in the Plane of the Walls”, Translation in Earthquake Engineering, Earthquake Engineering, Earthquake Engineering Research Center, S. 36-42, San Francisco, 1960.
  • [2] Benjamin, C.S. and Williams, H.A., “The Behavior of One Story Reinforced Concrete Shear Walls”, Proceedings of A.S.C.E., Vol. 83, No. S.T.3., Paper No. 1254, May 1957.
  • [3] Benjamin, C.S. and Williams, H.A., “The Behavior of One-Story Walls Containing Openings”, Journal of A.C.I., Vol. 30, pp. 605-18, 1958.
  • [4] Benjamin, C.S. and Williams, H.A., “The Behavior of One-Story Brick Shear Walls”, Proceedings of A.S.C.E., Vol. 84, No. S.T.4, Paper No. 1723, 1958.
  • [5] Holmes, M., “Steel Frames with and Concrete Infilling”, Proc. I.C.E., Vol. 19, pp. 473-478, 1961.
  • [6] Smith, B.S., “Lateral Stiffness of Infilled Frames”, Procee. A.S.C.E., Vol. 88, No. S.T.6, S. 183-99, 1962.
  • [7] Smith, B.S., “Infilled Frames”, Ph. D. Thesis, University of Bristol, 1963.
  • [8] Smith, B.S., “Composite Behavior of Infilled Frames” Conference of Tall Buildings, S. 481-482, London, 1967.
  • [9] Smith, B.S., and Carter, C., “A Method of Analysis for Infilled Frames”, Proc. I.C.E., S. 31-41, September 1969.
  • [10] Smolira, B., “Analysis of Infilled Shear Walls”, Proc. Proc. I.C.E. C. 2, S. 895-912, March 1973.
  • [11] Fiorata, A.E., Sozen, M.A. and Gamble, W.L., “An Investigation of the Interaction of Reinforced Concrete Frames with Masonry Filler Walls”, University of Illinois, Now. 1970.
  • [12] Holmes, M., “Combined Loading on Infilled Frames”, Institution of Civil Engineers, Vol. 19, pp. 473-478, 1961.
  • [13] Ersoy, U., Uzsoy, S., Aktan E., “DolguluCercevelerinDavranısveMukavemeti, Ankara, TUBITAK, PROGE MAG-205, 1971.
  • [14] Mainstone, R.J. Supplementary Note on the Stiffness and Strengths of Infilled Frames. Current paper cp 13/74. Building Research Station, Garston, Watford, United Kingdom, 1974.
  • [15] Marjani F, (1997) Behaviour of Brick Infilled Reinforced Concrete Frames Under Reversed Cyclic Loading”, Ph. D. Thesis, ODTU. Ankara, Turkay
  • [16] Karaduman, A., “DolguDuvarlarınınCercevelerinYatayYuklerAltındakiDavranıslarınaEtkileri”, Ph.D. Thesis, Selcuk University Institute of Natural and App. Sciences, Konya, 1998.
  • [17] Köken A, (2003) Tersinir-TekrarlanırYatayYüklemeAltındakiÇokKatlıVeÇokAçıklıklıDolguDuvarlıÇelikÇerçevelerinDavranışınınTeorikveDeneyselOlarakİncelenmesi”, Ph.D. Thesis, Selcuk University Institute of Natural and App. Sciences, Konya.
  • [18] Karaduman A, (2005) DolguDuvarlıÇerçevelerinYatayYüklerAltındakiDavranışlarıÜzerineDeneysel Bir Çalışma, Journal of Engineering Sciences, P.U. Engineering College,11,No. 3, pp 345-349, Denizli, Turkey.
  • [19] Kaltakcı MY, Korkmaz HH, Köken A, (2007) An investigation of the behaviour of steel frames with masonry infills under lateral loading,
  • [20] Medwell Online Journal of Engineering and Applied Sciences, 2, 930-943.
  • [21] Karaduman, A.,PolatZ.(2010). “The Behaviour of Infilled Frames Under Horizontal Loading”,Journal of International Environmental Application.Science, Vol 5(1),133-137, Konya,Turkey.
  • [22] Lila M. Abdel-Hafez, AEY, Abouelezz, Faseal F, Elzefeary, (2014), Behavior of masonry strengthened infilled reinforced concrete frames under in-plane load Housing and Building National Research CenterHBRC Journal doi:10.1016/j.hbrcj.2014.06.005
  • [23] Kaltakcı MY, Köken A, (2014) The Behaviour of Infilled Steel Frames Under Reverse Cyclic Loading, Advanced Steel Construction 10, 200-215.
  • [24] Karaduman, A.,PolatZ.(2015). “The Behaviour of Infilled Frames Under Horizontal Loading”,Journal of International Environmental Application.Science, Vol 11(1),55-59, Konya,Turkey.
  • [25] Skafida S, Koutas L, Bousias SN, (2014) Analytical Modeling of Masonry Infilled RC Frames and Verification with Experimental Data. Journal of Structures, 2, 17.
  • [26] Yalçın E, (1999) DolguDuvarlarinVeKonumlarininÇokKatliBetonarmeYapilarinDepremKuvvetleriAltindakiDavranişinaEtkileri, İTÜ, MSc Thesis, Istanbul, Turkey.
  • [27] Kaltakcı MY, Köken A, Korkmaz HH. (2008) An Experimental Study on The Behavior Of Infilled Steel Frames Under Reversed-Cycling Loading, Iranian Journal of Science and Technology B, Engineering, 32, 157-160.
  • [28] Nezhad AHV,Rasoolan,I (2013) Effect of the Use of Cross Bar Supporting of Infilled Masonry in Improving Seismic Performance of Steel Buildings. Journal of Academic and Applied Studies 3,38-52.

SOURCE SHOW

Citation type: APA

Adnan Karaduman. (2018). Statical Analysis of Infilled Frames. Ulusal Çevre Bilimleri Araştırma Dergisi, 1 ( 1 ) , 22-28. http://ijepem.com/volume-1/issue-1/article-5/

Citation type: BibTex

@article{2018, title={Statical Analysis of Infilled Frames}, volume={1}, number={1}, publisher={International Journal of Environmental Pollution and Environmental Modelling}, author={Adnan Karaduman}, year={2018}, pages={22-28} }

Citation type: MLA

Adnan Karaduman. Statical Analysis of Infilled Frames. no. 1 International Journal of Environmental Pollution and Environmental Modelling, (2018), pp. 22-28.